Your needs, this model
Does it fit your priorities?
Can the Camera Staff PL mount any camera?
The manufacturer describes a detachable cork grip with a camera-mount system and says the cork head is unscrewed to mount a camera. The page does not specify thread size, device compatibility, supported load or stability conditions, so confirm those before depending on a particular camera setup.
Explore this need in the finder →Does Camera Staff PL fit a 70 cm pack opening?
Its listed collapsed length is 73 cm, so it exceeds a 70 cm limit before allowance for clearance. Measure the real opening rather than treating a nominal figure as a fit guarantee.
Explore this need in the finder →Is Camera Staff PL available for direct purchase from Komperdell U.S.?
The exact U.S. page showed no B2C U.S. availability when checked on 2026-10-31. That dated observation does not establish permanent discontinuation or availability through every seller; verify the exact model and current offer directly.
Camera Staff PL is an adjustable hiking pole with a detachable camera-mount grip, rather than a camera accessory on its own. The exact U.S. listing is K1762300-10-Tele and places the working range at 115–150 cm, with a listed collapsed size of 73 cm and listed weight of 294 g. The page does not say whether the weight is per pole or pair, and the image does not establish how many items are in a retail offer.
There is a small source discrepancy on storage length: the page-linked manufacturer image carries a 72 cm callout, while the exact page's written specification and matching 2026 and 2027 Trekbook entries list 73 cm. I use the repeated written figure for this configuration, but someone near a pack-fit threshold should confirm the actual sale item rather than treat either label as a clearance measurement.
A specialized grip system, not a universal camera claim
Komperdell describes a cork foam Traveller grip plus a detachable cork head with a camera-mount system. Its explanation is that the head can be unscrewed to mount a camera for hiking photography. That is a useful differentiator for someone who wants a pole and camera-mount concept in one product, but the page does not identify thread dimensions, compatible camera types, maximum load or stability conditions. Confirm the interface against the exact camera and intended setup before depending on it; do not assume that a general tripod convention or a picture proves compatibility.
The trekking function is also documented: this is a three-section, 7075-T6 aluminum pole with 18/16/14 mm sections, Powerlock 3.0 external lever, and an ERGO strap that adjusts with hook-and-loop closure. Its 115–150 cm range is longer than many reviewed plans, but use only the specific length you have checked for your body, terrain and technique. The 73 cm collapsed length is the more consequential storage tradeoff. Measure the real pack sleeve or decide how you would attach a pole this long; nominal pack length does not guarantee that it fits an opening.
What remains unspecified
The matching Camera Staff article 176 23 00-10 appears in both the 2026 and 2027 Trekbooks, with the same 115–150 cm range, 73 cm packed dimension and 294 g listing as the exact U.S. page. Those catalog entries specify an FXP UL Vario basket, a Flex Carbide tip and a neoprene quiver as included. Check the seller's exact offer against that configuration; the sources do not identify a dedicated snow basket or confirm the number of poles sold. They also provide no independently measured camera load, support stability, pole flex, shock reduction or durability result.
The camera function also should not distract from the ordinary adjustment checks. Set the telescoping sections within the product's stated 115–150 cm span and stay below the maximum mark. The manufacturer's page says to clean and dry telescoping poles, store them released, and avoid lubricant on or in the shafts or locking system. If the lever slips or the shaft is damaged, do not use the pole as a camera support until the problem is resolved according to the exact instructions.
Availability and buying decision
When checked on 2026-10-31, the Komperdell U.S. product page showed no B2C U.S. availability and offered an inquiry route. That is an important dated limitation, not proof that the product has been permanently discontinued or that every outside retailer lacks it. Any listing should be checked for the exact K1762300-10-Tele name, current seller terms, quantity, condition and included accessories; this review makes no availability or price claim.
Camera Staff PL merits a closer look if the detachable mount feature is a real part of your hiking routine, the verified camera interface suits your equipment, and the 115–150 cm range and 73 cm storage length work for you. If you primarily want ordinary trekking poles, the extra camera feature may be irrelevant while the longer packed form remains. The source supports a specialized camera-mount grip and an adjustable pole, not universal camera fit or a tested tripod substitute. This is a research-based reading of the manufacturer page, not a hands-on test or an ownership claim.
Key specifications
Key details at a glance
| Minimum usable length | 115 cm |
|---|---|
| Maximum usable length | 150 cm |
| Collapsed length | 73 cm |
| Manufacturer-listed weight (basis shown in product notes) | 294 g |
| Adjustable working length | Yes |
| Shaft material | Aluminum 7075 t6 |
| Adjustment lock | External lever clamp |
| Grip material | Cork or cork-mix |
| Shaft sections | 3 |
| Included baskets | FXP UL Vario basket listed for article 176 23 00-10 in the 2026 and 2027 Trekbooks; confirm the exact seller package |
| Available usable-length ranges | 115–150 cm |
| Shaft storage design | Telescoping |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
Build a shortlist around your pole-length and trail needs.
The finder compares only documented settings and supplied features. Unknown details are not treated as a match.
